Серия РНК
  • Серия РНК
  • Серия РНК
Связаться с нами
Поделиться с

Скачать каталог

Features of these series

The compact designs of needle roller bearings, drawn cup needle roller bearings, drawn cup needle roller bearings with closed end and thrust needle roller bearings make possible a space-saving mounting either in the radial or the axial direction and offer nevertheless a relatively high load carrying capacity. Furthermore, radial needle roller bearings have got excellent non-locating bearing properties.

Versions of needle roller bearings

Needle roller bearings with solid rings

Main dimensions according to DIN 617 respectively DIN 617-1. Solid roller bearing rings made of steel allow a comparatively very high radial load carrying capacity. Available with- and without inner ring provided that the hardened and ground shaft is suitable as raceway.

Drawn cup needle roller bearings/ drawn cup needle roller bearings with closed end

Main dimensions according to DIN 618-1. Fine needles in the deep-drawn, hardened steel sheet casing guarantee a low profile height together with a high radial load carrying capacity. Usable if the shaft is suitable for the use as running surface and the bore in the housing is not suitable as running surface for a needle roller and cage assembly.

Needle roller and cage assemblies

Main dimensions according to DIN 5405-1. For the support of high radial loads and a storage being insensitive to shocks. Needle roller and cage assemblies offer the lowest radial section height compared to other needle roller bearings, require however also a hardened and ground raceway.

Axial needle roller and cage assemblies/thrust needle roller bearings

Main dimensions according to DIN 5405-2. Suitable for supporting high axial loads and shock-resistant storage. Needle roller and cage assemblies offer the lowest axial section height if the adjacent components are suitable for raceways. If not, bearing washers are additionally used.


>>
<<
ВыбратьзапросОбозначение подшипника Диаметр вала (мм)Вес (кг)Габаритные размеры (мм) Основная нагрузка (N) Ограничение скорости (оборотов в минуту)
Без ИКВесС ИКdFwDСВдинамическийстатическиймасло
RNA7.8169 - - - 7.8 - 7.8 16 - 9 - - -
RNA8X19X9 - - - 7.8 - 8 19 - 9 - - -
RNA8X14X8 - - - 7.8 - 8 14 - 8 - - -
RNA496 - - - 7.8 - 8 15 - 10 - - -
RNA8X15X10TN - - - 7.8 - 8 15 - 10 - - -
RNA4900 24.4 - - 7.8 - 14 22 - 13 8500 9000 25000
RNA6900 29.1 - - 7.8 - 14 22 - 22 12800 15600 25000
RNA152815 31.7 - - 7.8 - 15 28 - 15 13600 17200 24000
RNA4901 16.6 - - 7.8 - 16 24 - 13 6400 8900 15500
RNA6901 28.7 - - 7.8 - 16 24 - 22 14 000 18600 15500
RNA4902 20.5 - - 7.8 - 20 28 - 13 11 000 12900 12000
RNA6902 35.4 - - 7.8 - 20 28 - 23 10800 12800 12000
RNA5902 - - 7.8 - 20 28 - 18
RNA4903 20.7 - - 7.8 - 22 30 - 13 12000 16800 16300
RNA5903 - - 7.8 - 22 30 - 18
RNA6903 39.8 - - 7.8 - 22 30 - 23 14 000 19900 16300
RNA4904 50.8 - - 7.8 - 25 37 - 17 11900 16500 15000
RNA6904 97.7 - - 7.8 - 25 37 - 30 26000 43000 15000
RNA22/6 2RS 18 NA22/6 2RS 22 19 6 10 19 12 11.8 5000 4350 18000
RNA22/6 2RSX 18 NA22/6 2RSX 22 19 6 10 19 12 11.8 5000 4350 18000
Предыдущая123456Следующая
>>
<<
Связаться с нами